Lifestyle

Whether to store your laptop or fine foods from the farmers’ market, the Bassi Market Tote is a bag you’ll carry with pride. Ethically handcrafted by refugees in Italy using handwoven fabric from Burkina Faso, this everyday carryall is truly a vessel for positive change. Purposeful and impactful, it cleverly features inside and outside pockets, a sustainable snap closure, and a key holder for your bag charms.

* Final Sale.

An essential part of every gardener's kit, garden dibbers make planting bulbs, plants or seeds a breeze by ensuring a perfect hole at just the right depth, every time. Hand-crafted in Slovenia from untreated beechwood, this tapered Garden Dibber by Redecker has a rounded tip and laser-etched measurements to give greater accuracy on the depth of the hole. It comes complete with a leather hanging loop.

When tending to your garden, having reliable snips at hand is essential for cutting delicate blooms and harvesting fresh fruits and veggies. The Niwaki Garden Snips are perfect for the task: Hand-crafted in an old family-run factory in Japan, these snips have slender blades that make precise snips, they’re comfortable to hold and use, and they’ll last for years. Remember, they’re intended for green growth only — prefer Niwaki’s secateurs for woody pruning.

Ideal for cut flower arrangements, delicate deadheading in the garden or harvesting fruit and vegetables. Not as tough as Secateurs, so don’t try and cut woody stems with them! 

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

For daily pruning, Niwaki's Mainichi Secateurs are just the ticket. A favorite in Japan, these lightweight yet sturdy hand pruners are perfect for snipping delicate plants or cutting dead stems up to ⅝-inch thick. The strong carbon steel blades hand-forged in a family-run factory deliver clean, efficient cuts (healthier for your plants), while the chunky safety catch at the bottom helps prevent accidental cuts. The yellow handles make them harder to lose in the garden, and the well-balanced design provides comfortable use, even for smaller hands. 

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

When it’s time to harvest small fruits and veggies or clip blooms for your next floral arrangement, the Niwaki Forged Snips are the perfect tool for the job. These snips are exquisitely hand-forged in an old family-run factory in Japan and offer precision for a range of tasks, from delicate pruning to trimming. Each arm is crafted from a single piece of hard-wearing carbon steel, and the pointed tip allows you to get into tight spots and make neat cuts without harming the plants. Comfortable to hold and use over long periods, they're a favorite among Japanese gardeners for good reason.

Not as tough as secateurs, but they’ll handle light woody cuts and are ideal for detailed pruning and thinning, as well as Japanese pine pruning work. 

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

Ready to elevate your snipping game? Meet the Niwaki Rattan Snips. These Japanese-made snips are artfully hand-crafted from high-quality carbon steel, with attractive handles wrapped in Wisteria rattan that offer a textural grip. With their sharp blades, soft spring, and convenient leather catch, they’re perfect for snipping delicate flowers and foliage, or for use around the home.

Maximum cut diameter of 5mm (3/16 in), they can double as desk scissors. A thoughtful gift for the gardener in your life.

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

The Rattan Snips are heavier duty than the Niwaki Garden Snips.

Need precision? Look no further than Niwaki’s Mini Shears. Skillfully hand-crafted in Japan using time-honored techniques, these lightweight and compact shears are small enough to be carried around in a bucket or garden bag, and the ideal tool for trimming lavender hedges, maintaining grass edges, or tackling small-scale topiary projects. The ergonomic oak handles come with comfy red rubber grips for added comfort, while the hand-forged carbon steel blades deliver strength and durability. Designed for long-lasting use, they make a thoughtful gift for the gardening enthusiast in your life.

Blades are 126mm (5 in) long, and the handles are FSC Oak.

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

Looking for a reliable pair of compact pruners that can handle everything from flower arranging to quick snips in the greenhouse? Say hello to Niwaki's mini secateurs. Hand-crafted from high-quality carbon steel using traditional methods in Japan, these lightweight pruners are built to last for years when properly cared for. The leather leggings add natural character and grip that will only improve with age. A thoughtful gift for the gardener in your life.

With a maximum cut diameter of 5mm (3/16 in), they're perfect for "back pocket" jobs when larger pruners aren't needed.

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

When it comes to light pruning work, Niwaki's Fujimaki Rattan Secateurs are truly special. Hand-forged in Japan from hard-wearing KA70 carbon steel. The stunning handles, wrapped in beautiful Wisteria rattan for a unique, textured grip. Keep in mind that rattan requires some extra care, so treat these pruners with the love they deserve and enjoy their reliable performance for years to come.

This limited-edition tool offers clean, efficient, and fast-healing cuts with a maximum cut diameter of 15mm (0.6 in).

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

When you want to prune with careful precision, reach out for your Niwaki Kurumi Secateurs. Hand-forged in Japan, they're made from high-quality carbon steel using traditional methods for clean, efficient, and fast-healing cuts. The beautiful walnut wood inlay handles provide not only a natural warmth but also a comfortable grip for extended use. With a maximum cut diameter of 10mm (just over ⅜ in), they're ideal for delicate pruning tasks. Trust these beautifully crafted Japanese pruners to help you achieve your gardening goals with precision and ease for years to come.

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

Whether you're pruning trees and houseplants or cutting woody stems for your flower arrangements, Niwaki's Higurashi Secateurs will make any task effortless with their strong, sharp blades. Handcrafted with the finest drop-forged carbon steel in an old family-run Japanese factory, these pruners are designed with attention to detail, from their slightly textured handles to the chunky catch. Delivering long-lasting quality and a refined cutting action, this trusty tool is perfect for all-day use and will serve you for years.

Drop-forged from Carbon Steel, with yellow vinyl handles which will prevent you loosing them in the garden! Ideal for woodier stems in flower arrangements and general garden pruning. Max cut is 10mm (0.4 in). 

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

Haws is synonymous with top-quality watering cans, and the Rowley Ripple 2 Pint is a shining example of the brand’s fine craftsmanship tradition. With its gracefully curved spout, this elegant metal can offers unmatched balance and precision, while the removable oval non-drip brass rose delivers the most perfect spray for delicate seedlings, small plants, and pots. Crafted to last, it will keep your garden or greenhouse looking beautiful for years to come. (Plus, it comes in an attractive, gift-ready Haws box.) Each can take more than 200 steps to complete, part of a tradition of quality that dates back to 1886.

* Copper cans might have minor imperfections upon arrival, which can be rectified by following the instructions provided below.

When it’s time to refresh your plant care routine, choose Haws’ The Warley Fall (Two Gallon). A favorite among expert gardeners, this watering can effortlessly reaches deep into flowerbeds with its extra-long spout, while the downspout is perfect for hanging baskets and pots. It includes a non-drip brass rose that delivers a delicate rainfall spray, and carries an impressive two gallons (or 9l), so it’ll keep watering when most other cans have stopped. Crafted from galvanized and powder-coated steel for lasting durability, it is beautifully presented in a gift-ready Haws box.

Whether you're a seasoned floral designer or just starting out, a traditional Japanese Kenzan (or flower frog) will take your flower arranging skills to the next level. This tried-and-true florist tool, traditionally used in the ancient art of ikebana, provides a reliable base for keeping stems in place and a sustainable alternative to floral foam. Niwaki's round version is expertly crafted in Japan with strong brass pins that can hold woody and green stalks alike while naturally opening the stems for better water absorption, ensuring your blooms last longer.

Niwaki’s products are crafted to last for years. With proper care, the Japanese carbon steel will stay sharp and usable, and your Niwaki products can be passed onto future generations.

When it’s time to refresh your plant care routine, choose Haws’ Warley Fall. A favorite among expert gardeners, this watering can effortlessly reaches deep into flowerbeds with its extra-long spout, while the downspout is perfect for hanging baskets and pots. It includes a non-drip brass rose that delivers a delicate rainfall spray, and carries an impressive two gallons (or 9l), so it’ll keep watering when most other cans have stopped. Crafted from galvanized and powder-coated steel for lasting durability, this limited edition can comes in a rich, nature-inspired colorway exclusive to Goodee. Plus, it's beautifully presented in a gift-ready Haws box.

If the gardener in your life doesn’t have a pair of pruners, Niwaki’s Tokusen Secateur Set makes a thoughtful gift. Combining functionality and elegance, this trio of finely crafted Japanese hand-pruners includes:

• Tokusen 165mm: a smaller pair that fits perfectly in the palm of your hand. Perfect for light garden pruning, deadheading and cut flowers. Although smaller than the full size Tokusen 210mm, it’s not just for small hands! 
• Tokusen 210mm: powerful and beautiful with a punchy spring and coil cushioning for heavy and more demanding pruning. 
• Tokusen Barracudas: for all gardening requirements. Longer blades than regular secateurs, but with a chunky bypass blade for woodier pruning. Ideal for everyday woody cuts. 

Expertly hand-forged in Japanese S58C Carbon Steel by master craftsman Yamakawa San, these secateurs are easy to sharpen to a keen edge, ensuring precise cuts every time. The cherry on top? They come wrapped in hand-dyed tenugui cotton and presented in a beautiful Paulownia gift box.

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

Ready to sculpt your garden with precision and style or gift the gardener in your life? Choose Niwaki’s Hakari clippers. Specifically designed for the organic contours of cloud-pruned topiary and rolling, wavy hedges, these curved blade clippers are meticulously crafted from YCS carbon steel, ensuring both durability and sharpness. And, they bear the mark of true excellence, being expertly hand-forged in the mountains of Yamagata by master craftsman Yamakawa San. Each pair comes with a hard-wearing cotton pouch and a spare spring for convenience. Japanese craftsmanship at its finest.

The Hakari Clippers  are handmade, therefore the curvature of the blade may differ slightly from pair to pair.

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

For pruning and snipping that require a finer touch, the Kurumi Pro Snips by Niwaki are the perfect choice. Hand-crafted using traditional methods, these beautiful snips are forged from hard-wearing KA70 carbon steel, ensuring exceptional durability, with two-pointed blades providing superior accuracy. Walnut wood inlays in the handles add natural warmth and style.

Maintain their sharpness by cutting diagonally across branches and using the base for heavier cuts (up to Ø5mm) and experience Japanese craftsmanship at its finest.

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

For precise and delicate pruning tasks, choose the Higurashi Snips by Niwaki. Handcrafted in Japan from the finest drop-forged carbon steel, they excel at cutting flowers, tending houseplants, shaping bonsai, and more with slender blades that effortlessly maneuver tight spots without causing damage.

Keep them in optimal condition by always cutting diagonally across branches and use the base instead of the tips for heavier cuts (up to Ø3mm).

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

Get ready to unleash your floral creativity with the Sakagen Flower Scissors by Niwaki. Designed for those who appreciate the artistry of flower arranging, these beautifully hand-crafted scissors from Japan seamlessly combine traditional ikebana style with modern flair. Their ergonomic resin-molded handles and fluorine-coated blades make it easy to effortlessly cut stems — they'll even handle a bit of woody pruning too. From the kitchen to the garden, they're the perfect tool for adding a touch of beauty to every corner of your home. 

Max cut 5mm. Perfect for cut flowers in the kitchen, greenhouse and around the garden, and will handle a bit of woody stem cutting too. 

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

Need scissors that can handle both delicate flowers and woodier stems? Niwaki’s Sentei Garden Scissors are for you. Expertly crafted from high-quality carbon steel in Japan, they provide sharp, precise cuts (which is healthier for your plants), and will last for decades with proper maintenance. The round handles provide a comfortable grip, perfect for delicate work and substantial tasks alike, and they’re ideal for smaller hands. For best results, use the tips for careful work and make bigger cuts further down the blades.

Perfect for deadheading, cut flowers and light pruning - they will handle woodier stems about a pencil thickness (max cut 5mm). Slight movement in the blade allows for a cleaner cut, rather than crushing stems. 

Digging, trenching, or clearing ground? This Niwaki spade can handle it all. Not only is it incredibly strong and sharp, easily cutting through stones, roots, and challenging soil, but it's also surprisingly light and gloriously golden. Crafted with precision in Japan, it's built to last with a comfortable YD tubular steel handle, firm tread, and a rigid steel pipe shaft that won't bend or break, even under heavy use. Plus, at only 980g (just over 2 lbs), it won't weigh you down. As you work with it, the paint will naturally wear away, and the steel will start to rust — this is your cue to start applying oil for maintenance.

Looking for the most efficient way to feed chickadees, titmice, finches, or woodpeckers in your area? The Silo Bird Feeder is the perfect choice for birds that cling vertically while eating. Inspired by years of studying bird-eating habits, Pidät's debut product functions like a grain silo, filling from the bottom up to keep birdseed clean and dry. Made from durable polypropylene (100% upcycled post-consumer waste plastic) and stainless steel, the Silo is a 'functional sculpture' that feeds the birds while minimizing impact on nature. Even the coloring process is eco-friendly, using a water-free dye. All parts can be easily disassembled and recycled, contributing back to the circular economy.

Discover more about the artistry behind the Pidät story.

Looking for a warm scarf to bundle up on cold days and make a style statement at the same time? Meticulously crafted in a rich mohair and extra-fine wool blend using time-honored techniques, this heirloom-quality winter essential is so cozy you’ll never want to take it off. The unique tie-dye pattern, sumptuous texture, and knotted fringe make this scarf a beautiful piece of wearable art and a seasonal favorite.

Please note that as each scarf is dyed individually, there might be slight variation in the color and/or pattern of each piece. 

The ideal gift for your plant-loving friends and family? Undoubtedly, the Haws Indoor Watering Gift Set. A pleasure to behold and use, this exquisite duo provides all they need to nurture their plants, whether indoors or out. It includes a Rowley Ripple copper watering can and a matching Smethwick Spritzer. These thoughtfully crafted, traditional English tools will add a touch of sophistication to their plant care routine while ensuring effortless watering. Plus, they’re beautifully presented in a gift-ready Haws box.

Copper cans might have minor imperfections upon arrival, which can be rectified by following the instructions provided below.

* This set includes one Rowley Ripple Two Pint and one Smethwick Spritzer 8oz.

When it’s time to water your hanging baskets and deep flower beds, you know you can trust your Haws Brass Spray Lance to provide your plants with all the water they need, without wasting a single drop. Expertly hand-crafted and built to last forever, this stunning watering tool is approximately 2 ft long (600mm) with an all-brass screw-on rose that stays securely in place under pressure, whether used with a hose pipe or a vacuum pressure tank. A fine gift for your green-fingered friends and family.

When your garden tools start losing their edge, restore the quality of the blades with Niwaki's handy Maintenance Kit. The kit includes three Japanese whetstones expertly crafted in Osaka with high-grade aluminum oxide.

• A #220 coarse, grinding stone for rough blades.
• A #1000 sharpening stone for regular sharpening.
• A #3000 honing stone for more detailed work.

All stones are small enough to access tight spaces and maintain just about every edged blade. Before use, soak the stones thoroughly, then use the concave side to work on hand pruners and curved blades, and the flat side for shears and other straight blades. Handle with care to avoid dropping.

Concave bottom of the stones is ideal for the curve of secateurs blades, and the flat edges are ideal for snips and clippers longer straight blades. 

Trimming hedges, shrubs, and topiary has never been easier with Niwaki Garden Shears. Hand-crafted in Japan using traditional methods, these no-nonsense shears are made from hard-wearing SK steel that lasts for years. With perfectly sized white oak handles and subtle bulges halfway down for optimal balance, they’re great for everyday use. Whether you're an experienced gardener or just starting out, these shears are the ideal all-around option to keep your garden looking pristine.

Perfect for cut hedges, shrubs, box clipping and topiary work. 

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

Whether planting bulbs, weeding your vegetable garden, or removing stubborn roots, the Niwaki Hori Hori and Holster will quickly become your go-to tool. Beautifully hand-crafted in Japan, this multi-purpose garden knife makes light work of any gardening task. The sharp, high-quality carbon steel blade ensures clean and efficient cutting and the beautiful beech handle provides a comfortable grip. When not in use, the holster keeps the blade — and your hands — safe while the convenient belt clip allows for easy access on the go. You'll wonder how you ever gardened without it.

Although Japanese carbon steel is durable, it can chip if mishandled, so use with care.

Niwaki’s products are crafted to last for years. With proper care, the Japanese carbon steel will stay sharp and usable, and your Niwaki products can be passed onto future generations.

The perfect tool for loosening up hard soil or weeding carefully around your veggies? The Moku Cultivator by Niwaki is an invaluable gardening essential made to last through years of diligent garden work. Thoughtfully crafted with robust carbon steel tines and a strong ash wood handle, it will tear through dense, rocky soil, effortlessly uprooting weeds, while providing a comfortable grip.

An olla is a traditional clay vessel that uses ancient irrigation techniques to keep plants perfectly hydrated. Its porous surface allows water to seep directly to the roots, delivering just the right amount, exactly when needed.

Lovingly handcrafted in Portugal by artisans Ana and Vitor, the Olla Self-Watering Pot by Pepin is made in the historic Leiria region, celebrated for its rich ceramic traditions. Each piece is one of a kind, with unique textures and a natural finish that add charm to your garden while simplifying plant care.

An olla is a traditional clay vessel that uses ancient irrigation techniques to keep plants perfectly hydrated. Its porous surface allows water to seep directly to the roots, delivering just the right amount, exactly when needed.

Lovingly handcrafted in Portugal by artisans Ana and Vitor, the Olla Self-Watering Pot by Pepin is made in the historic Leiria region, celebrated for its rich ceramic traditions. Each piece is one of a kind, with unique textures and finishes that add charm to your garden while simplifying plant care.

An olla is a traditional clay vessel that uses ancient irrigation techniques to keep plants perfectly hydrated. Its porous surface allows water to seep directly to the roots, delivering just the right amount, exactly when needed.

Lovingly handcrafted in Portugal, the mini Ollas Self-Watering Pots by Pepin are made in the historic Leiria region, celebrated for its rich ceramic traditions. Each piece is one of a kind, with unique textures that add charm to your garden while simplifying plant care. This set of three mini Ollas makes a thoughtful and practical gift for any plant lover.

Expertly crafted with quality materials and heritage techniques, The Victorian Square Cloche  by Claverton Cloche is built to stand the test of time. Its cast iron frame ensures resilience against even the harshest weather, while galvanization and powder-coating guarantee lasting durability.

Hand-glazed with horticultural glass and finished in a classic off-white, it offers a timeless look, with a removable lid for easy plant care. Thoughtful details, like the antique-style handle and brass plaque, complete this beautifully crafted piece, blending functionality with enduring charm.

A top choice for professional gardeners, this long-reach metal watering can is hot-dipped galvanized (HDG) for exceptional durability and lifelong protection against corrosion. Designed for efficiency, it includes a high-flow fine spray rose for delicate watering and a downspout ideal for hanging baskets and pots. The pure zinc base ensures total resistance to rust.

Its extended spout reaches deep into flowerbeds, optimizing water pressure for a precise, even spray. Compatible with multiple interchangeable accessories, it’s perfect for everything from delicate seedlings to mature garden plants. Beautifully boxed, it also makes a thoughtful gift.

HDG, or hot-dipped galvanization, involves immersing the steel can in molten zinc, creating a tough, all-around protective layer. The finish is lightly refined for a cleaner look, though a naturally mottled texture is to be expected as part of the galvanization process.

Haws is known for top-quality watering cans, and the Fazeley Flow 2 Pint—available exclusively at Goodee—is a perfect example of its fine craftsmanship. Designed for balance and precision, its gracefully curved, non-drip spout delivers pinpoint accuracy—ideal for delicate plants. Crafted to last and hand-painted in a soft, nature-inspired lichen green hue, it will keep your indoor garden thriving for years. Plus, it comes in a beautifully gift-ready Haws box.

Keep your garden tools neatly organized and ready to use with this beautifully simple hanging rack by Iris Hantverk. Handcrafted from untreated birch by artisans with impaired vision, it offers an elegant, space-efficient way to organize everything from trowels and shears to gloves and twine. Install it in a shed, garage, or under cover outdoors, and leave it natural or finish it with oil, wax, or paint. For extra storage, mount multiple racks side by side. A thoughtful, sustainable solution for any gardener.

Crafted from durable stainless steel and coated with a robust Hardshell™ powder finish, the MiiR Dog Bowl holds over 6 cups of food or water, offering both practicality and style. Designed with a non-slip footpad, it stays firmly in place, even for the most eager eaters. A thoughtful blend of function, design, and sustainability for your pet’s everyday needs.

Meet the perfect small watering can for keeping your interior jungle in tip-top condition.
Its elegantly curved non-drip spout delivers pinpoint watering accuracy, helping avoid splashes around your potted plants. Available in hand-polished copper, or galvanised steel in a green, it comes beautifully boxed and makes the perfect present.

* Copper cans might have minor imperfections upon arrival, which can be rectified by following the instructions provided below.

Haws is synonymous with top-quality watering cans, and the Rowley Ripple 2 Pint is a shining example of the brand’s fine craftsmanship tradition. With its gracefully curved spout, this elegant metal can offers unmatched balance and precision, while the removable oval non-drip brass rose delivers the most perfect spray for delicate seedlings, small plants, and pots. Crafted to last and hand-painted with a rich, nature-inspired colorway exclusive to Goodee, it will keep your garden or greenhouse looking beautiful for years to come. (Plus, it comes in an attractive, gift-ready Haws box.)

* Each hammered copper can is hand-worked, so small surface or seam variations are natural. They’re purely cosmetic and won’t affect performance.

A gardener’s companion for both precision and durability, the Goodee x Niwaki Moku Tool Set brings Japanese craftsmanship to your everyday rituals outdoors. Thoughtfully designed for balance, longevity, and beauty, each piece honors the art of gardening as much as the garden itself.

Moku Cultivator

Crafted with robust carbon steel tines and a smooth ash wood handle, the Moku Cultivator is built to glide through dense, rocky soil—loosening earth, uprooting weeds, and creating space for new growth. Strong yet comfortable in the hand, it’s a tool made to last through seasons of steady use.

Moku Trowel

Hand-forged in Sanjo, Niigata by a father-and-son team of metalworkers, the Moku Trowel reflects generations of skill and care. Its surface bears subtle hammer marks, each one a trace of its making. Ideal for potting, planting, and light garden use, this trowel embodies quiet strength and craftsmanship—best reserved for softer soils rather than heavy digging.

* This set includes one Moku Cultivator and one Moku Trowel.

For pruning with intention and precision, the Goodee x Niwaki Kurumi Set offers two finely crafted tools that embody the beauty and function of Japanese design. Forged from hard-wearing carbon steel and finished with smooth walnut wood inlays, each piece is built for both performance and comfort, elevating your everyday gardening rituals.

Kurumi Pro Snips

Perfect for delicate pruning and snipping, these hand-crafted snips feature slender, pointed blades for superior accuracy. Forged from KA70 carbon steel using traditional methods, they promise lasting sharpness and strength, while walnut-inlaid handles bring a natural warmth to the grip. Use the base of the blades for heavier cuts (up to Ø5 mm) and maintain precision by cutting diagonally across branches.

Kurumi Secateurs

Designed for clean, efficient cuts, the hand-forged Kurumi Secateurs combine robust carbon steel blades with the same refined walnut inlays for comfort and style. With a cutting capacity of up to 10 mm (just over ⅜ in), they’re ideal for light pruning, helping plants heal faster while offering a tool you’ll reach for season after season.

* This set includes one Kurumi Pro Snips and one Kurumi Secateurs.

An inky blend of cool denim, sienna, and deep navy lays the foundation for this richly layered scarf. Flickers of fiery orange, soft sage, and vivid blue weave through the composition like brushstrokes, adding bursts of unexpected warmth and movement. The result is a striking yet grounded piece that feels both artful and elemental—perfect for adding dimension to any look.

With its rustic charm and tactile warmth, the Edera scarf blends bold contrast with soft, natural elegance. Zigzag patterns in powder pink and pollen yellow ripple through a rich landscape of woody tones, grounded by deep berry and black borders. A wearable statement that brings a touch of wild nature and thoughtful design to cooler days.

A grounding blend of forest greens and rich browns, with subtle aqua accents that bring a breath of freshness. The Maela scarf captures the quiet beauty of the natural world through the lens of artist Fred Ingrams, drawing on the shapes and textures of his iconic landscapes. Elongated triangles echo his visual language, while bold blocks of colour and woven patterns evoke the patchwork fields that define his work. A wearable expression of art, place, and perspective.

Dreamy colors appear to melt into one another in this dynamic accessory. Soft yet durable, this eye-catching wool scarf bears resemblance to its namesake throw. The Matisse scarf may style itself effortlessly, but each one is meticulously crafted with the utmost care and effort, hand-treated every step of the way. The striking shades featured in Matisse's work are represented here, however Ezcaray's execution of them—an artful blend from one hue to the next—feels nearly neutral. Warm and chic, wear this cozy essential with everything this season.

Please note that as each scarf is dyed individually, there might be slight variation in the color and/or pattern of each piece. 

Bold yet refined, the Twist Frame Scarf plays with contrast and movement, transforming a simple accessory into a wearable statement. Woven from the softest wool and carefully hand-finished, it combines warmth with a lightweight drape that feels effortless against the skin. The graphic frame motif creates a dynamic sense of structure, grounding the piece while allowing its fluid texture to shine. Equally at home wrapped over outerwear or styled as a standout detail indoors, this scarf is a timeless essential—designed to keep you chic and cozy season after season.

Please note that as each scarf is dyed individually, there might be slight variation in the color and/or pattern of each piece. 

The ideal gift for your plant-loving friends and family? Undoubtedly, the Haws Indoor Watering Gift Set. A pleasure to behold and use, this exquisite duo provides all they need to nurture their plants, whether indoors or out. It includes a limited-edition Rowley Ripple metal watering can in a rich, nature-inspired colorway exclusive to Goodee and a hand-polished brass Smethwick Spritzer. These thoughtfully crafted, traditional English tools will add a touch of sophistication to their plant care routine while ensuring effortless watering. Plus, they’re beautifully presented in a gift-ready Haws box.

* This set includes one Rowley Ripple Two Pint and one Smethwick Spritzer 8oz.

When it’s time to refresh your plant care routine, choose Haws’ Warley Fall. A favorite among expert gardeners, this watering can effortlessly reaches deep into flowerbeds with its extra-long spout, while the downspout is perfect for hanging baskets and pots. It includes a non-drip brass rose that delivers a delicate rainfall spray. Crafted from galvanized and powder-coated steel for lasting durability, this limited edition can comes in a rich, nature-inspired colorway exclusive to Goodee. Plus, it's beautifully presented in a gift-ready Haws box.

Meet the perfect small watering can for keeping your interior jungle in tip-top condition.
Its elegantly curved non-drip spout delivers pinpoint watering accuracy, helping avoid splashes around your potted plants. Available in hand-polished copper, or galvanised steel in a green, it comes beautifully boxed and makes the perfect present.

* Each hammered copper can is hand-worked, so small surface or seam variations are natural. They’re purely cosmetic and won’t affect performance.

Hand-crafted in Miki, Hyogo — a historic center of Japanese garden toolmaking — the Niwaki Hori Hori Pro is forged from durable SK-5 carbon steel for exceptional sharpness, strength, and edge retention. Designed by third-generation craftsmen, it handles digging, weeding, planting, cutting, and dividing with ease. The contoured FSC beech handle offers lasting comfort, while the canvas sheath provides safe storage and quick access. Look for the Niwaki kanji stamped into the steel as a mark of its authentic craftsmanship.

Beloved by gardeners for its versatility, the Hori Hori Pro quickly becomes an everyday essential — from planting bulbs to tackling stubborn roots. Japanese carbon steel is strong but can chip if misused, so take care with heavy prying. With proper maintenance, this tool will stay sharp and reliable for years, ready to be passed down through generations.